2013 Toyota Prius ThreeFACTORY OEM SERVICE PROCEDURE

General Maintenance

  1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY 
    1. If necessary, tighten the bolts and nuts on the chassis parts listed below.
      • Front axle and suspension
      • Drive train
      • Rear axle and suspension
      • Brake system
      • Engine mounts
      • Other chassis parts
    2. If necessary, tighten the bolts and nuts on the body parts listed below.
      • Seat belt system
      • Seats
      • Doors and hood
      • Body mounts
      • Fuel tank
      • Exhaust system
      • Other body parts
  2. REPLACE AIR CONDITIONING FILTER 
    1. Remove the air conditioning filter. Refer to DISASSEMBLY - Step 3 .
    2. Visually inspect the surface of the air conditioning filter.
    3. If the air conditioning filter is contaminated with foreign matter, replace it.
  3. ROAD TEST 
    1. Check the engine and chassis for abnormal noises.
    2. Check that the vehicle does not wander or pull to one side.
    3. Check that the brakes work properly and do not drag.
  4. BODY INSPECTION 
    1. Check the body exterior for dents, scratches and rust.
    2. Check the underbody for rust and damage.

      If necessary, replace the damaged part or repair the damaged area.

  5. FINAL INSPECTION 
    1. Check the operation of the body parts.
      1. Hood
        • Auxiliary catch operates properly.
        • Hood locks securely when closed.
      2. Front and rear doors
        • Door locks operate properly.
        • Doors close properly.
      3. Luggage compartment door
        • Luggage compartment door opens and closes properly.
      4. Seats
        • Seat adjusts easily and lock securely in any position.
        • Front seatbacks lock securely in any position.
        • Fold-down rear seatbacks lock securely.
      5. Be sure to deliver a clean car. Make sure to check the following:
        • Steering wheel
        • Shift lever knob
        • All switches and knobs
        • Door handles
        • Seats
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.