How To Proceed With Troubleshooting

HINT: 

• Use the following procedure to troubleshoot the occupant classification system.
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. CUSTOMER PROBLEM ANALYSIS 
   1. Confirm problem symptoms. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .

      NEXT: Go to next step 

3. PASSENGER AIRBAG ON/OFF INDICATOR CHECK 
   1. Proceed to Diagnosis System. Refer to DIAGNOSIS SYSTEM .

      NEXT: Go to next step 

4. DTC CHECK (Present and History DTCs)* 
   1. Proceed to DTC Check / Clear. Refer to DTC CHECK / CLEAR .

      Result

      Result	Proceed to
      DTC is output.	A
      DTC is not output.	B

      B → GO TO PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE  

      A: Go to next step 

5. DTC CHART 
   1. Proceed to Diagnostic Trouble Code Chart. Refer to DIAGNOSTIC TROUBLE CODE CHART .

      NEXT: Go to next step 

6. CIRCUIT INSPECTION* 

   NEXT: Go to next step 

7. REPAIR 

   NEXT: Go to next step 

8. CLEAR DTCS (Present and History DTCs)* 
   1. Proceed to DTC Check / Clear. Refer to DTC CHECK / CLEAR .

      NEXT: Go to next step 

9. DTC CHECK* 
   1. Proceed to DTC Check / Clear. Refer to DTC CHECK / CLEAR .

      Result

      Result	Proceed to
      DTC is not output.	A
      DTC is output.	B

      B → GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART  

      A: Go to next step 

10. SYMPTOM SIMULATION 
    1. Check the passenger airbag ON/OFF indicator condition.

       Result

       Result	Proceed to
       Passenger airbag ON/OFF indicator operates normally.	A
       Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on.	B

       B → GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART  

       A: Go to next step 

11. CONFIRMATION TEST 

    NEXT → END