2013 Toyota Matrix Base, Automatic TransFACTORY OEM SERVICE PROCEDURE

Service Data

Fuel pressure Standard fuel pressure 304 to 343 kPa (3.1 to 3.5 kgf/cm2 , 44.1 to 49.7 psi)
Fuel pressure : at fuel pressure remains for 5 minutes after engine has stopped Standard fuel pressure 147 kPa (1.5 kgf/cm2 , 21 psi) or more
Fuel injector assembly Standard resistance 11.6 to 12.4 Ξ© at 20Β°C (68Β°F)
Injection volume 60 to 73 cc (3.7 to 4.5 cu.in.) per 15 seconds
Difference between each fuel injector 13 cc (0.8 cu.in.) or less
Standard leakage 1 drop or less every 12 minutes
Fuel pump Standard resistance 0.2 to 3.0 Ξ© at 20Β°C (68Β°F)
Fuel Sender gauge assembly Standard resistance 13.5 to 16.5 Ξ©(Float level F)
13.5 to 414.5 Ξ©(Float level E to F)
405.5 to 414.5 Ξ©(Float level E)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.