2012 Toyota FJ Cruiser RWDFACTORY OEM SERVICE PROCEDURE

Customize Parameters

HINT: 

The following can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. SEAT BELT WARNING SYSTEM 
    WARNING

    Display Default Content Setting
    Driver Side Seatbelt Warning Buzzer ON If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.4 mph) or more, the system sounds the seat belt warning buzzer. ON / OFF
    Front Passenger Side Seatbelt Warning Buzzer ON If the front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.4 mph) or more, the system sounds the seat belt warning buzzer. ON / OFF
  2. LIGHTING SYSTEM 
    ILLUMINATED ENTRY

    Display Default Content Setting
    I/L when ACC OFF ON Lights up the room light, rear room light and ignition switch illumination when the ignition switch is turned from ACC to off. ON/OFF
    Lighting Time 15 s Changes the lighting time of the room light, rear room light and ignition switch illumination after closing all of the doors. (It will quickly fade out in case of turning the ignition switch to ON.) ON / OFF
    I/L ON W/ Unlock ON Lights up the room light, rear room light and ignition switch illumination when a door is unlocked. ON / OFF
    LIGHT CONTROL

    Display Default Content Setting
    Light Auto OFF Delay 30 s Function to keep on lighting the headlight for a certain period of time after closing all the doors with the ignition switch turned OFF from ON under the condition that the light control switch is at HEAD or AUTO with the headlight ON. OFF/ 30/ 60/ 90 s

    HINT: 

    Sensitivity adjustment can hardly be confirmed. Please check by customer's actual driving.

  3. POWER DOOR LOCK CONTROL SYSTEM 
    MAIN BODY

    Display Default Content Setting
    Unlock Key Twice ON Unlocks only driver side door when driver side door key cylinder turned to unlock once, and unlocks all doors when turned to unlock twice. For OFF setting, turning it once unlocks all doors. ON / OFF
  4. WIRELESS DOOR LOCK CONTROL SYSTEM 
    MAIN BODY

    Display Default Content Setting
    Open Door Warning ON If a door is not completely closed and LOCK is pressed, this function sounds a buzzer for 10 seconds ON / OFF
    Hazard Answer Back ON When wireless lock switch on transmitter pressed, illuminates all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice ON / OFF
    Wireless Buzzer Vol MAX To adjust the volume of the wireless buzzer OFF / MIN / MID1/ MID2 /MID3 / MAX
    Wireless Control ON ON / OFF of wireless door lock function. ON / OFF
    Panic Function ON Operates security alarm when panic switch on transmitter continuously pressed for 1 second ON / OFF
    Unlock 2 Operation ON Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON / OFF
    Auto Lock Time 60 s Time until relocking after unlocking with wireless door lock function 60 seconds / 30 seconds
    Wireless Auto Lock ON Function of automatically looking doors after unlocking doors with wireless key. ON/OFF
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.