Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Toyota Avalon BaseFACTORY OEM SERVICE PROCEDURE
Engine Switch Indicator Circuit: Description
Engine start conditions or system malfunctions can be checked by the status of the engine switch indicator light.
ENGINE SWITCH INDICATOR LIGHT CONDITION:
| Power Source Mode / Condition | Indicator Light Condition | |
|---|---|---|
| No brake pedal depressed | Brake pedal depressed with shift lever in "P" or "N" | |
| OFF | Turn OFF | Turn ON (Green) |
| ACC, IG-ON, START | Turn ON (Amber) | Turn ON (Green) |
| Engine Running | Turn OFF | Turn OFF |
| Steering lock not unlocked | Flash (Green) for 30 seconds | Flash (Green) for 30 seconds |
| Push Button Start System Malfunction | Flash (Amber) for 15 seconds | Flash (Amber) for 15 seconds |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.