2011 Toyota Avalon XLSFACTORY OEM SERVICE PROCEDURE

Service Data

Vacuum switching valve No. 1  
Resistance at 20°C (68°F) 26 to 30 Ω
at 100°C (212°F) 32 to 40 Ω
VSV for EVAP  
Resistance 1 - 2 26 to 30 Ω at 20°C (68°F)
1 - Body ground 10 kΩ or higher
2 - Body ground 10 kΩ or higher
Air fuel ratio sensor  
Resistance 1 (HT) - 2 (+B) 0.8 to 1.4 Ω at 20°C (68°F)
Oxygen sensor  
Resistance 1 (HT) - 2 (+B) 11 to 16 Ω at 20°C (68°F)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.