2010 Toyota Sienna XLE, AWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.50 OZS. 0.16 L PAG 46 S
Air Cond Refrigerant 1.75 LBS. 0.79 KG R-134a S
Automatic Transmission Fluid Drain and Refill 3.70 QTS. 3.5 L TOYOTA Genuine Automatic Transmission Fluid Type WS S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil AWD Rear 1.00 QTS. 0.94 L API - GL-5. Above 0Deg.F: SAE 90W. Below 0Deg. F: 80W or 80W-90 Hypoid Gear Oil S
Engine Coolant Total Capacity 12.00 QTS. 11.35 L TOYOTA Super Long Life Coolant or equivalent DO NOT use plain water alone. S
Engine Oil 3.5L Eng,Eng CD 2GR-FE 6.40 QTS. 6.05 L ILSAC SAE 5W-30 S
Fuel Tank 20.90 GALS. 79.11 L S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON II or DEXRON III S
Transfer Case Fluid AWD 1.00 QTS. 0.94 L API - GL-5. Above 0Deg.F: SAE 90W. Below 0Deg. F: 80W or 80W-90 Hypoid Gear Oil S
Windshield Washer Fluid N/A N/A Plain water In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.