Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE
Service Data
SKID CONTROL BUZZER
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) voltage → Terminal 2 | Skid control buzzer sounds |
| Battery negative (-) → Terminal 1 |
VSC OFF SWITCH
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3 - 6 | Pressed | Below 1 Ω |
| Not Pressed | 10 kΩ or higher |
CRAWL SWITCH
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3 (ECU1) - 20 (E) | Speed Selector: MID | 10 kΩ or higher |
| Speed Selector: HI | ||
| Speed Selector: LO | Below 1 Ω | |
| 4 (ECU2) - 20 (E) | Speed Selector: MID | 10 kΩ or higher |
| Speed Selector: HI | Below 1 Ω | |
| Speed Selector: LO | ||
| 2 (HSW) - 20 (E) | ON/OFF: Pressed | Below 1 Ω |
| ON/OFF: Not pressed | 10 kΩ or higher |
BRK LP RELAY
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 4 | Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2 | 10 kΩ or higher |
| Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2 | Below 1 Ω | |
| 3 - 5 | Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2 | Below 1 Ω |
| Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2 | 10 kΩ or higher |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.