CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

NOTE:

When the customer requests a change in a function, first make sure the function(s) can be customized.
Be sure to make note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Select the setting by referring to the table below.

POWER WINDOW

Display	Default	Contents	Setting
Door Key P/W Up	OFF	Function that raises all the power windows when, with the engine switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec.	ON/OFF
Door Key P/W Down	OFF	Function that lowers all the power windows when, with the engine switch off, a key is used to hold driver door key cylinder to the unlock position for more than 2.3 sec.	ON/OFF
P/W Down W/ Transmit	OFF	Function that lowers all the power windows when, with the engine switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.	ON/OFF
P/W Up W/ Smart	OFF	Function that raises all the power windows when, with the engine switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec.	ON/OFF

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Customize Parameters