2009 Toyota Yaris S, 4D HatchbackFACTORY OEM SERVICE PROCEDURE

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH TECHSTREAMΒ 

    HINT:

    The following item can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical / Main Body / Utility / Customize.
    5. Select the setting by referring to the table below.

    Main Body:Β 

    POWER DOOR LOCK CONTROL SYSTEM

    Display (Item) Default Function Setting
    UNLK/KEY TWICE ON Unlocks only driver side door when driver side door key cylinder turned to unlock once, and unlocks all doors when turned to unlock twice. For OFF setting, turning it once unlocks all doors ON/OFF
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.