How To Proceed With Troubleshooting

HINT:

• Use these procedures to troubleshoot the electronically controlled brake system.
• *: Use the Teachstream.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS 
3. CHECK DTC AND FREEZE FRAME DATA* 
4. CLEAR DTC AND FREEZE FRAME DATA* 
5. PROBLEM SYMPTOM CONFIRMATION 

   Result 

   SYMPTOM CHART
   
   

   Result	Proceed to
   Symptom does not occur	A
   Symptom occur	B

   B: Go to STEP  7

   A: Go to Next Step 

6. SYMPTOM SIMULATION 
7. CHECK FOR DTC* 

   Result 

   SYMPTOM CHART
   
   

   Result	Proceed to
   There is no output	A
   There is output	B

   B: Go to STEP  9

   A: Go to Next Step 

8. PROBLEM SYMPTOMS TABLE 

   NEXT: CHECK FOR FLUID LEAKAGE AND GO TO STEP  11

9. SYMPTOM SIMULATION 
10. DTC CHART 
11. CIRCUIT INSPECTION* 
12. IDENTIFICATION OF PROBLEM 
13. REPAIR OR REPLACE 
14. CONFIRMATION TEST* 

    NEXT: END