2009 Toyota Matrix Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Service Data

BRAKE SYSTEM (OTHER) - SERVICE DATA

Brake pedal height from dash panel 141.4 to 151.4 mm (5.57 to 5.96 in.)
Brake pedal free play 1.0 to 6.0 mm (0.0394 to 0.236 in.)
Brake pedal reserve distance from dash panel at 294 N (30 kgf, 66 lbf) for 2ZR-FE for Torsion Beam 87 mm (3.43 in.)
for 2AZ-FE for Torsion Beam 85 mm (3.35 in.)
for Double Wishbone 87 mm (3.43 in.)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.