Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

DISCHARGE FUEL SYSTEM PRESSURE
1. Discharge fuel system pressure (See FUEL SYSTEM ).
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE NO. 2 CYLINDER HEAD COVER (See REMOVAL )
DISCONNECT NO. 2 VENTILATION HOSE
1. Disconnect the No. 2 ventilation hose.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE (See REMOVAL )

Fig 1: Locating No. 2 Ventilation Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ENGINE WIRE
1. Remove the 2 bolts and disconnect the ground wire.
2. Disconnect the 4 fuel injector assembly connectors.
3. Disconnect the 2 wire harness clamps.
  
  Fig 2: Identifying Fuel Injector Assembly Connectors And Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the 4 wire harness clamps.
  
  Fig 3: Locating Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 2 bolts and 2 wire harness brackets.
  
  Fig 4: Locating Wire Harness Brackets With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT FUEL TUBE SUB-ASSEMBLY
1. Remove the No. 2 fuel pipe clamp (Type A).
  
  Fig 5: Locating No. 2 Fuel Pipe Clamp (Type A)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the No. 2 fuel pipe clamp (Type B).
  
  Fig 6: Locating No. 2 Fuel Pipe Clamp (Type B)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST, disconnect the fuel tube sub-assembly.
  SST 09268-21010
  
  Fig 7: Disconnect Fuel Tube Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY
1. Remove the bolt and remove the wire harness bracket.
  
  Fig 8: Locating Wire Harness Bracket Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts.
  
  Fig 9: Locating Fuel Delivery Pipe Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the bolt and the fuel delivery pipe sub-assembly.
  
  Fig 10: Locating Fuel Delivery Pipe Sub-Assembly Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 No. 1 delivery pipe spacers.
  
  Fig 11: Locating No. 1 Delivery Pipe Spacers
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL INJECTOR ASSEMBLY
1. Pull the 4 fuel injector assemblies out of the fuel delivery pipe sub-assembly.
  
  Fig 12: Pulling Fuel Injector Assemblies Out Of Fuel Delivery Pipe Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. For reinstallation, attach a tag or label to the injector shaft.
  NOTE: Prevent entry of foreign objects by covering the fuel injector with a plastic bag.