Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2009FJ CRUISER RWDREPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSCHARGING SYSTEM (SERVICE SPECIFICATIONS)CHARGING SYSTEMSERVICE DATA
2009 Toyota FJ Cruiser RWD
Service Data
2009 Toyota FJ Cruiser RWDSECTION Service Data
CHARGING - SERVICE DATA SPECIFICATION
| Battery | Voltage | Standard | 12.6 to 12.9 V at 20°C(68°F) | |
|---|---|---|---|---|
| Charging circuit without load | Amperage | 10A or less | ||
| Voltage | 13.2 to 14.8 V | |||
| Generator (DENSO made) | Generator brush holder assembly | Brush length | Standard | 10.5 mm (0.413 in.) |
| Minimum | 4.5 mm (0.177 in.) | |||
| Generator rotor assembly | Resistance | Standard | 2.3 to 2.7 Ω at 20°C (68°F) | |
| Slip ring diameter | Standard | 14.2 to 14.4 mm (0.559 to 0.567 in.) | ||
| Minimum | 14.0 mm (0.551 in.) | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.