2009 Toyota Avalon XLSFACTORY OEM SERVICE PROCEDURE

Monitor Description

The ECM monitors the idle speed and idle airflow volume to conduct Idle Speed Control (ISC). The ECM determines that the ISC system is malfunctioning if the following conditions are met:

  • The learned idle air flow volume remains at the maximum or minimum 5 times or more during a driving cycle.
  • While driving at 6.25 mph (10 km/h) or more, the actual engine idle speed varies from the target idle speed by between -100 rpm and 150 rpm, 5 times or more during a driving cycle.

Example:

If the actual idle speed varies from the target idle speed by more than 150 rpm* 5 times during a driving cycle, the ECM illuminates the MIL and sets the DTC.

HINT:

*: Threshold idle speed varies with the engine load.

Fig 1: Idle Speed And Idle Airflow Volume Graph
G05404607Courtesy of Β© TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.