Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Toyota Sequoia SR5, 5.7 Y, RWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 7.00 OZS. | 0.2 L | PAG 46 | Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.96 LBS. | 0.88 KG | R-134a | S | |||
| Automatic Transmission Fluid | 5.7L Eng | w/o Towing Pkg | 11.70 QTS. | 11.07 L | TOYOTA Genuine Automatic Transmission Fluid Type WS | S | |
| Automatic Transmission Fluid | 5.7L Eng | w/Towing Pkg | 12.40 QTS. | 11.73 L | TOYOTA Genuine Automatic Transmission Fluid Type WS | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Rear | 1.64 QTS. | 1.55 L | TOYOTA Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent | S | ||
| Engine Coolant | 5.7L Eng | w/o Towing Pkg | 14.50 QTS. | 13.72 L | TOYOTA Super Long Life Coolant or equivalent | DO NOT use plain water alone. | S |
| Engine Coolant | 5.7L Eng | w/Towing Pkg | 15.40 QTS. | 14.57 L | TOYOTA Super Long Life Coolant or equivalent | DO NOT use plain water alone. | S |
| Engine Oil | 5.7L Eng | Drain and Refill,w/Filter | 7.40 QTS. | 7 L | ILSAC SAE 5W-20 or 0W-20 | S | |
| Engine Oil | 5.7L Eng | Drain and Refill,w/o Filter | 6.90 QTS. | 6.52 L | ILSAC SAE 5W-20 or 0W-20 | S | |
| Fuel Tank | 26.40 GALS. | 99.93 L | S | ||||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON II or DEXRON III | S | |||
| Transfer Case Fluid | 1.50 QTS. | 1.41 L | API - GL-4 or GL- 5, SAE 75W-90 Hypoid Gear Oil | S | |||
| Windshield Washer Fluid | N/A | N/A | Plain water | In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.