Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications
Brake actuator
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake line union nut | 15 | 155 | 11 |
| Brake actuator x No. 2 brake actuator bracket | 18 | 184 | 13 |
| Brake actuator x Gusset | 7.5 | 76 | 66 in.*lbf |
| Brake actuator x bracket | 18 | 184 | 13 |
| Brake actuator x Brake actuator damper | 18 | 184 | 13 |
| Brake actuator w/ gusset x Body | 20 | 200 | 15 |
| Brake actuator x Brake tube clamp bracket | 5.0 | 51 | 44 in.*lbf |
| Brake actuator tube set nut | 8.5 | 87 | 75 in.*lbf |
| No. 1 front brake tube set bolt | 5.0 | 51 | 44 in.*lbf |
| Brake actuator bracket x No. 5 front brake tube bracket | 5.0 | 51 | 44 in.*lbf |
| Brake actuator resistor set nut | 5.0 | 51 | 44 in.*lbf |
Front speed sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Front speed sensor set bolt | 8.0 | 82 | 71 in.*lbf |
| Front speed sensor wire clamp x Body | 8.0 | 82 | 71 in.*lbf |
| Front speed sensor wire clamp x Shock absorber | 19 | 192 | 14 |
| Wheel nut | 103 | 1,050 | 76 |
Yaw rate sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Yaw rate sensor set bolt | 19 | 194 | 14 |
Skid control ECU
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Skid control ECU set nut | 5.0 | 51 | 44 in.*lbf |
Brake control power supply
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake control power supply assembly set bolt | 19 | 194 | 14 |
Brake pedal stroke sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake pedal stroke sensor set bolt | 9.3 | 95 | 82 in.*lbf |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.