Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Shift Range Change Function
The gear can be shifted to any shift range when the vehicle can drive except when the reject function is in operation.
When the vehicle cannot drive and the power SW is IG ON, the gear can only be shifted to the P and N position.
When vehicle cannot drive and the power SW is ACC ON, the gear can only be shifted to the P position.
When the power SW is OFF, the gear cannot be shifted to any position.
If main SW is operated when the vehicle has stopped after starting the hybrid system, the gear is automatically changed to the P position from any other gear position and the power supply is turned off.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.