2008 Toyota Matrix Base, StandardFACTORY OEM SERVICE PROCEDURE

Service Data

1ZZ-FE FUEL SERVICE DATA SPECIFICATION

Fuel pressure Standard 304 to 343 kPa (3.1 to 3.5 kgf/cm2 , 44 to 50 psi)
Fuel injector assembly  
Resistance (1 - 2) Standard 11.6 to 12.4 Ω at 20°C (68°F)
Injection volume 60 to 73 cm3 (3.6 to 4.5 cu in.) per 15 seconds
Difference between each fuel injector 13 cm3 (0.9 cu in.) or less
Leakage Standard 1 drop or less per 12 minutes
Fuel pump  
Resistance (1 (+) - 2 (-)) Standard 0.2 to 3.0 Ω at 20°C (68°F)
Compression spring (Exhaust pipe assembly front x Exhaust manifold)  
Free length Minimum 41.5 mm (1.6339 in.)
Compression spring (Exhaust pipe assembly tail x Exhaust pipe assembly front)  
Free length Minimum 38.5 mm (1.5158 in.)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.