2008 Toyota Matrix Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Personal Light Assembly: Inspection

  1. INSPECT PERSONAL LIGHT ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester connection Switch operation Specified resistance
      1 - 3 OFF 10 kΩ or higher
      Fig 1: Identifying (M3) Personal Light Assembly Connector Terminals
      G05236875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the illumination comes on when switch operation is ON position.
  2. INSPECT PERSONAL LIGHT ASSEMBLY (ELECTRO CHROMIC MIRROR INNER MIRROR) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester connection Switch operation Specified resistance
      1 - 6 OFF 10 kΩ or higher
    2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.
      Fig 2: Identifying (I13) Personal Light Assembly (Electro Chromic Mirror Inner Mirror) Connector Terminals
      G05236876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.