Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2008 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE

Fuel Injector: Installation

INSTALL FUEL INJECTOR ASSEMBLY
1. Attach the 3 clamps to install the No. 6 wire harness to the delivery pipe RH.
  
  Fig 1: Identifying Fuel Delivery Pipe RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Attach the 3 clamps to install the No. 7 wire harness to the delivery pipe LH.
  
  Fig 2: Identifying Fuel Delivery Pipe LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Apply gasoline or spindle oil to a new O-ring and install it to the injector.
  NOTE: Make sure that there is no damage or foreign material in the groove of the injector when installing the O-ring.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty

Get a Free Quote

No obligation. See pricing before you book.