2008 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE

Problem Symptoms Table

HINT:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Windshield Deicer SystemΒ 

SYMPTOMS CHART

Symptom Suspected Area See Reference
Windshield deicer does not operate DEICER relay WINDSHIELD DEICER DOES NOT OPERATEΒ 
LIN communication line -
CAN communication line -
Air conditioning amplifier -
Air conditioning control assembly*1 -
Multi-display*2 -
DEICER fuse -
Harness or connector -
HINT:
*1: w/o Multi-display
*2: w/Multi-display
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.