2008 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE

Problem Symptoms Table

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Power Window Control System 

POWER WINDOW CONTROL SYSTEM CHART

Symptom Suspected Area See Reference
Remote up/down function does not operate LIN communication system REMOTE UP/DOWN FUNCTION DOES NOT OPERATE 
Multiplex network master switch -
Front passenger side power window does not operate with power window regulator switch LIN communication system DRIVER SIDE POWER WINDOW DOES NOT OPERATE WITH POWER WINDOW MASTER SWITCH 
Power window regulator switch -
Front power window regulator motor RH -
Harness or connector -
Rear power window LH does not operate with power window regulator switch LIN communication system FRONT PASSENGER SIDE POWER WINDOW DOES NOT OPERATE WITH FRONT PASSENGER SIDE POWER WINDOW SWITCH 
Rear power window regulator switch LH -
Rear power window regulator motor LH -
Harness or connector -
Rear power window RH does not operate with power window regulator switch LIN communication system REAR POWER WINDOW LH DOES NOT OPERATE WITH REAR POWER WINDOW SWITCH LH 
Rear power window regulator switch RH -
Rear power window regulator motor RH -
Harness or connector -
Driver side power window auto up/down function does not operate LIN communication system DRIVER SIDE POWER WINDOW AUTO UP/DOWN FUNCTION DOES NOT OPERATE WITH POWER WINDOW MASTER SWITCH 
Multiplex network master switch -
Front power window regulator motor LH -
Harness or connector -
Front passenger side power window auto up/down function does not operate LIN communication system FRONT PASSENGER SIDE POWER WINDOW AUTO UP/DOWN FUNCTION DOES NOT OPERATE WITH FRONT PASSENGER SIDE POWER WINDOW SWITCH 
Power window regulator switch -
Front power window regulator motor RH -
Harness or connector -
Rear power window LH auto up/down function does not operate LIN communication system REAR POWER WINDOW LH AUTO UP/DOWN FUNCTION DOES NOT OPERATE WITH REAR POWER WINDOW SWITCH LH 
Rear power window regulator switch LH -
Rear power window regulator motor LH -
Harness or connector -
Rear power window RH auto up/down function does not operate LIN communication system REAR POWER WINDOW RH AUTO UP/DOWN FUNCTION DOES NOT OPERATE WITH REAR POWER WINDOW SWITCH RH 
Rear power window regulator switch RH -
Rear power window regulator motor RH -
Harness or connector -
All power windows do not operate with driver side door key cylinder or wireless transmitter Wireless door lock control system ALL POWER WINDOWS DO NOT OPERATE WITH DRIVER SIDE DOOR KEY CYLINDER OR WIRELESS TRANSMITTER 
Power door lock control system -
Main body ECU -
Key-off operation function operates even if operating conditions are not satisfied LIN communication system KEY-OFF OPERATION FUNCTION OPERATES EVEN IF OPERATING CONDITIONS ARE NOT SATISFIED 
Front door courtesy light switch -
Main body ECU -
Auto up operation does not fully close power window (jam protection is activated) Glass position initialization AUTO UP OPERATION DOES NOT FULLY CLOSE POWER WINDOW (JAM PROTECTION FUNCTION IS ACTIVATED) 
Improper installation (door glass run) -
Power window regulator motor (applicable location) -
Jam protection function does not operate Glass position initialization JAM PROTECTION FUNCTION DOES NOT OPERATE 
Power window regulator motor (applicable location) -
All power window up functions do not operate with entry lock switch Entry lock switch ALL POWER WINDOW UP FUNCTIONS DO NOT OPERATE WITH ENTRY LOCK SWITCH 
Main body ECU -
Auto down operation does not fully open power window Glass position initialization AUTO UP OPERATION DOES NOT FULLY CLOSE POWER WINDOW (JAM PROTECTION FUNCTION IS ACTIVATED) 
Improper installation (door glass run) -
Power window regulator motor (applicable location) -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.