2008 Toyota Corolla LE, AutomaticFACTORY OEM SERVICE PROCEDURE

Drive Shaft: SST

SST REFERENCE

G05192085Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09240-00020 Wire Gauge Set
G05192086Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09242-00080) Wire Gauge 0.8 mm (0.031 in.)
G05192087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09242-00150) Wire Gauge 1.5 mm (0.059 in.)
G05192088Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09520-01010 Drive Shaft Remover Attachment
G05192089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09520-24010 Differential Side Gear Shaft Puller
G05192090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09520-32040) Shocker Set
G05192091Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09521-24010 Rear Axle Shaft Puller
G05192092Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09527-10011 Rear Axle Shaft Bearing Remover
G05192093Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09527-21011 Rear Axle Shaft Bearing Remover
G05192094Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09608-16042 Front Hub Bearing Adjusting Tool
G05192095Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09608-02021) Bolt &Nut
G05192096Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09608-02041) Retainer
G05192097Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09628-62011 Boll Joint Puller
G05192098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09710-04081 Base
G05192099Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09726-40010 Lower Control Shaft Bearing Replacer
G05192100Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09930-00010 Drive Shaft Nut Chisel
G05192101Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-00020 Bearing Remover
G05192102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-60010 Replacer Set
G05192103Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00650) Replacer 65
G05192104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-70010 Handle Set
G05192105Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-07100) Handle 100
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.