2008 Toyota Corolla LE, AutomaticFACTORY OEM SERVICE PROCEDURE

Fail-Safe Chart

  1. FAIL SAFE OPERATION 
    1. If there is a problem with sensor signals or actuator systems, the skid control ECU prohibits power supply to the brake actuator and prohibits ABS control.

      The ABS control will be prohibited, but EBD control continues as much as possible. If EBD control is impossible, the BRAKE warning light comes on to warn the driver.

      FAIL-SAFE CHART

      Malfunction Symptom
      ABS system ABS control prohibited
      EBD system ABS and EBD control prohibited

      HINT:

      If the ABS system encounters a malfunction, the brake system will operate normally without ABS control.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.