Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2008 Toyota Camry Base, Standard
Quick Lookups: Fluids
2008 Toyota Camry Base, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | 6.00 OZS. | 0.17 L | PAG 46 | S | ||
| Air Cond Refrigerant | 1.25 LBS. | 0.56 KG | R-134a | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 2.4L Eng | 6.60 QTS. | 6.24 L | TOYOTA Super Long Life Coolant or equivalent | DO NOT use plain water alone. | S | |
| Engine Oil | 2.4L Eng | Drain and Refill,w/Filter | 4.50 QTS. | 4.25 L | SAE 5W-20 or 0W-20 | S | |
| Engine Oil | 2.4L Eng | Drain and Refill,w/o Filter | 4.30 QTS. | 4.06 L | SAE 5W-20 or 0W-20 | S | |
| Fuel Tank | Base,CE,LE,SE,XLE | 18.50 GALS. | 70.03 L | S | |||
| Manual Transmission Fluid | 2.60 QTS. | 2.46 L | API - GL-4 or GL-5, SAE 75W-90 | S | |||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON II or DEXRON III | S | |||
| Windshield Washer Fluid | N/A | N/A | Plain water | In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.