Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Toyota Camry Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Service Data
2AZ-FXE ENGINE CONTROL SYSTEM - SERVICE DATA
| Camshaft timing oil control valve assembly | ||
| Standard resistance | at 20°C (68°F) | 6.9 to 7.9 Ω |
| Camshaft position sensor | ||
| Standard resistance | 1 (G+) - 2 (G-) | 835 to 1, 400 Ω at Cold |
| 1 (G+) - 2 (G-) | 1, 060 to 1, 645 Ω at Hot | |
| Crankshaft position sensor | ||
| Standard resistance | Cold | 985 to 1, 600 Ω |
| Hot | 1, 265 to 1, 890 Ω | |
| Throttle body assembly | ||
| Standard resistance | at 20°C (68°F) | |
| 2 (M+) -1 (M-) | 0.3 to 100 Ω | |
| E.F.I, engine coolant temperature sensor | ||
| Standard resistance | Approx. 20°C (68°F) | 2.32 to 2.59 kΩ |
| Approx. 80°C (176°F) | 0.310 to 0.326 kΩ | |
| Knock sensor | ||
| Standard resistance | at 20°C (68°F) | 120 to 280 kΩ |
| Circuit opening relay (engine room RIB Unit D) | ||
| Specified condition | 1E-8 - 1E-12 | Below 1 Ω |
| 1E-7 - 1E-13 | 10 kΩ or higher | |
| 1E-7 - 1E-13 | Below 1 Ω (when battery voltage is applied to terminals 1G-5 and 1H-9) | |
| EFI relay (engine room R/B Unit D) | ||
| Specified condition | 1E-9 - 1E-10 | Below 1 Ω |
| 1E-7 - 1E-12 | 10 kΩ or higher | |
| 1E-7 - 1E-12 | Below 1 Ω (when battery voltage is applied to terminals 1H-10 and 1H-2) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.