Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Control System: ECM: Installation
- INSTALL ECM BRACKET NO. 2
- Install ECM bracket No. 2 with the 2 screws.
- INSTALL ECM BRACKET
- Install the ECM bracket with the 2 screws.
- INSTALL ECM
- Install the ECM with the bolt and 2 nuts.
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- Connect the 2 ECM connectors.
- Install the 2 lock knobs and harness clamp.
- Install the ECM with the bolt and 2 nuts.
- INSTALL COWL TOP PANEL OUTER (for Hatchback) (See INSTALLATION )
- INSTALL COWL TOP PANEL OUTER (for Sedan)
- Install the cowl top panel outer and install the 8 bolts.
Torque: 6.5 N*m (66 kgf*cm, 58 in.*lbf)
- Install the cowl top panel outer center bracket and install the 2 bolts.
Torque: 6.5 N*m (66 kgf*cm, 58 in.*lbf)
- Connect the wire harness and engage the claw.
- Install the cowl top panel outer and install the 8 bolts.
- INSTALL FRONT AIR SHUTTER SEAL (for Sedan)
- Install the front air shutter seal and engage the 3 claws.
- INSTALL COWL TO REGISTER DUCT SUB-ASSEMBLY NO. 2 (for Hatchback) (See INSTALLATION )
- INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Hatchback) (See INSTALLATION )
- INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Sedan) (See INSTALLATION )
- INSTALL COWL TOP VENTILATOR LOUVER LH (for Hatchback) (See INSTALLATION )
- INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Hatchback) (See INSTALLATION )
- INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Sedan) (See INSTALLATION )
- INSTALL HOOD TO COWL TOP SEAL (for Hatchback) (See INSTALLATION )
- INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY LH (for Sedan) (See INSTALLATION )
- INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY RH (for Sedan) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Hatchback) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Sedan) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Hatchback) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Sedan) (See INSTALLATION )
- INSTALL FRONT WIPER ARM HEAD CAP (for Hatchback) (See INSTALLATION )
- INSTALL FRONT WIPER ARM HEAD CAP (for Sedan) (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.
