Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Front Strut Bar: Installation
- TEMPORARILY TIGHTEN FRONT STRUT BAR BRACKET LH
- Install the front strut bar bracket LH to the front strut bar with the bolt.
- INSTALL FRONT STRUT BAR BRACKET RH
- Install the front strut bar bracket RH to the front strut bar with the bolt.
Torque: 52 N*m (530 kgf*cm, 38 ft.*lbf)
- Install the front strut bar bracket RH to the front strut bar with the bolt.
- INSTALL FRONT STRUT BAR
- Install the front strut bar with the 6 nuts.
Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf)
- Engage the hose clamp to the front strut bar.
- Install the front strut bar with the 6 nuts.
- FULLY TIGHTEN FRONT STRUT BAR BRACKET LH
- Fully tighten the nut.
Torque: 52 N*m (530 kgf*cm, 38 ft.*lbf)
- Fully tighten the nut.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.