2007 Toyota Matrix Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Throttle Body: Inspection

  1. INSPECT THROTTLE BODY ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        RESISTANCE SPECIFICATIONS

        Tester Connection Specified Condition
        1 (M-) - 2 (M+) 0.3 to 100 Ω at 20°C (68°F)
        3 (E2) - 5 (VC) 2.0 to 4.0 kΩ at 20°C (68°F)

        If the result is not as specified, replace the throttle body.

        Fig 1: Inspecting Throttle Body Assembly
        G05232966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.