2007 Toyota Matrix Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Electrical Component Locator: Switches

SWITCHES LOCATION

Component Location
Back-Up Light SW On left side of transaxle. See Figure.
Brake Fluid Level Warning SW On brake fluid reservoir. See Figure.
Buckle SW LH In left front seat belt buckle. See Figure.
Buckle SW RH In right front seat belt buckle. See Figure.
Clutch Start SW On bracket, above clutch pedal. See Figure.
Cruise Control Clutch SW On bracket, above clutch pedal. See Figure.
Door Courtesy SW Front LH In left "B" pillar. See Figure.
Door Courtesy SW Front RH In right "B" pillar. See Figure.
Door Courtesy SW Rear LH Forward of left rear wheelwell. See Figure.
Door Courtesy SW Rear RH Forward of right rear wheelwell. See Figure.
Door Unlock Detection SW Front LH At rear of left front door. See Figure.
Door Unlock Detection SW Front RH At rear of right front door. See Figure.
Door Unlock Detection SW Rear LH At rear of left rear door. See Figure.
Door Unlock Detection SW Rear RH At rear of right rear door. See Figure.
Glass Hatch Courtesy SW At center of back door. See Figure.
Oil Pressure SW On lower left side of engine. See Figure.
Parking Brake SW At base of park brake lever. See Figure.
Park/Neutral Position SW On left side of transaxle. See Figure.
Power Steering Oil Pressure SW At right rear of engine compartment. See Figure.
Pressure SW At right side of engine compartment. See Figure.
Stop Light SW On bracket, above brake pedal. See Figure.
Unlock Warning SW On steering column, behind ignition key cylinder. See Figure.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.