SUSPENSION CONTROL TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Active height control pump motor
AHC fluid line	15	155	11
AHC pump motor bracket x Body	18	185	13
AHC pump motor bracket x AHC pump motor assembly	5.5	55	48 in.*lbf
Cushion bolt	6.9	70	61 in.*lbf
Bracket x AHC pump motor assembly	5.5	55	48 in.*lbf
Reservoir x Housing	6.9	70	61 in.*lbf
Reservoir bracket x Housing	12	120	8
Fluid pressure sensor	44	450	33
Fluid temperature sensor	22	220	16
pump cover x housing	12	120	3
Pump sub-assembly x Housing	5.6	58	50 in.*lbf
Pump motor x Housing	5.2	53	46 in.*lbf
Control valve assembly
AHC fluid line	15	155	11
Bracket x Control valve assembly	5.5	55	48 in.*lbf
Cushion bolt	7.8	80	69 in.*lbf
Cover x Control valve assembly	4.4	45	38 in.*lbf
Height control accumulator
Inlet fluid line	15	155	11
Outlet fluid line	30 (24)	310 (245)	22 (18)
Height control accumulator x Body	29	300	22
Bleeder plug	6.9	70	61 in.*lbf
Pump attenuator	-
Inlet fluid line	15	155	11
Outlet fluid line	30 (24)	310 (245)	22 (18)
Pump attenuator x Body	18	185	13
Damping force control actuator
Inlet fluid line	15	155	11
Outlet fluid line	44	450	33
Cover x Body	28	290	21
Bleeder plug	8.3	84	73 in.*lbf
Damping force control actuator x Body	29	300	22
Gas chamber x Damping force control actuator	90 (25)	918 (250)	66 (18)
Height control sensor
Height control sensor link x Front upper suspension arm	5.6	57	49 in.*lbf
Height control sensor link x Rear upper control arm	5.6	57	49 in.*lbf
Height control sensor x Body	28	285	21

(): For use with SST

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Torque Specifications