2007 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE

Ignition System: Preparation: Axle: SST

AXLE SST TOOLS

G04434844Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09023-00101 Union Nut Wrench 10 mm -
G04434845Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09308-00010 Oil Seal Puller -
G04434846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09521-25011 Rear Axle Shaft Puller -
G04434847Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09521-25023 Rear Axle Shaft Puller Attachment -
G04434848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09607-60020 Front Wheel Adjusting Nut Wrench -
G04434849Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09628-62011 Boll Joint Puller -
G04434850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09631-12090 Seal Ring Tool -
G04434851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-60010 Replacer Set -
G04434852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00540) Replacer 54 -
G04434853Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-60020 Replacer Set No.2 -
G04434854Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00710) Replacer 71 -
G04434855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00730) Replacer 73 -
G04434856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00810) Replacer 81 -
G04434857Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00890) Replacer 89 -
G04434858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00910) Replacer 91 -
G04434859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-01030) Replacer 103 -
G04434860Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-70010 Handle Set -
G04434861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-00890) Replacer 89 -
G04434862Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-07100) Handle 100 -
G04434863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-07150) Handle 150 -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.