2007 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) 

    HINT:

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function(s) can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Power window control system: 

    CUSTOMIZE PARAMETERS (POWER WINDOW CONTROL SYSTEM)

    Display (Item) Default Contents Setting
    UP / DOOR KEY (Door key linked P/W UP) ON Function to make all door windows go up manually by holding driver's side door key to lock side for 1.5 seconds when ignition switch is OFF ON / OFF
    DOWN / DOOR KEY (Door key linked P/W DOWN) ON Function to make all door windows go down manually by holding the driver's side door key to unlock side for 1.5 seconds when ignition switch is OFF ON / OFF
    DOWN / WIRELESS (P/W DOWN w/transmitter) ON Function to make all door windows go down manually by pressing on transmitter unlock button for 2.5 seconds when ignition switch is OFF ON / OFF
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.