Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Toyota FJ Cruiser 4WD, AutomaticFACTORY OEM SERVICE PROCEDURE
Engine Control Systems: Preparation: Differential: Lubricant
Front differential
FRONT DIFFERENTIAL - LUBRICANT
| Item | Capacity | Oil grade | Classification |
|---|---|---|---|
| w/ A.D.D. | 1.45 to 1.55 liters (1.53 to 1.63 US qts, 1.27 to 1.36 Imp. qts.) | Hypoid gear oil APL GL-4 and GL-5 | Above -18°C (0°F): SAE 90) Below -18°C (0°F): SAE 75W-90 |
| w/o A.D.D. | 1.35 to 1.45 liters (1.42 to 1.53 US qts, 1.18 to 1.27 Imp. qts.) | Hypoid gear oil APL GL-4 and GL-5 | Above -18°C (0°F): SAE 90) Below -18°C (0°F): SAE 85W-90 |
Rear differential
REAR DIFFERENTIAL - LUBRICANT
| Item | Capacity | Oil grade | Classification |
|---|---|---|---|
| w/ Differential lock | 2.85 to 2.95 liters (3.01 to 3.12 US qts, 2.51 to 2.60 Imp. qts.) | Hypoid gear oil APL GL-5 | Above -18°C (0°F): SAE 90) Below -18°C (0°F): SAE 85W-90 |
| w/o Differential lock | 2.95 to 3.05 liters (3.12 to 3.22 US qts, 2.60 to 2.68 Imp. qts.) | Hypoid gear oil APL GL-5 | Above -18°C (0°F): SAE 90) Below -18°C (0°F): SAE 85W-90 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.