Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006MATRIX BASE, FWD, STANDARDREPAIR AND DIAGNOSISGENERAL INFORMATIONTOWINGINTRODUCTIONIDENTIFICATION INFORMATIONVEHICLE IDENTIFICATION AND SERIAL NUMBERS
2006 Toyota Matrix Base, FWD, Standard
Vehicle Identification And Serial Numbers
2006 Toyota Matrix Base, FWD, StandardSECTION Vehicle Identification And Serial Numbers
- VEHICLE IDENTIFICATION NUMBER
- The vehicle identification number is stamped on the vehicle body and on the certification label, as shown in the illustration.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Vehicle Identification Number
- Certification Label
- Frame Number
- The vehicle identification number is stamped on the vehicle body and on the certification label, as shown in the illustration.
- ENGINE SERIAL NUMBER AND TRANSMISSION SERIAL NUMBER
- The engine serial number is stamped on the cylinder block of the engine, and the transaxle serial number is stamped on the housing, as shown in the illustration.
- 1ZZ-FE, 2ZZ-GE
- C59, C60
- A246E
- U341F
- The engine serial number is stamped on the cylinder block of the engine, and the transaxle serial number is stamped on the housing, as shown in the illustration.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.