2006 Toyota Highlander Limited, FWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas 4.50 OZS. 0.13 L PAG 46 S
Air Cond Refrigerant 1.30 LBS. 0.58 KG R-134a Approximate capacity. S
Automatic Transmission Fluid Base,Limited,Sport 3.70 QTS. 3.5 L TOYOTA Genuine Automatic Transmission Fluid Type T IV ATF JWS3309 or NWS6500. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant 3.3L Eng w/o Rear Heater,w/o Towing Package 9.90 QTS. 9.36 L TOYOTA Super Long Life Coolant or equivalent DO NOT use alcohol type antifreeze or plain water alone. S
Engine Coolant 3.3L Eng w/o Rear Heater,w/Towing Package 10.70 QTS. 10.12 L TOYOTA Super Long Life Coolant or equivalent DO NOT use alcohol type antifreeze or plain water alone. S
Engine Coolant 3.3L Eng w/Rear Heater,w/o Towing Package 11.30 QTS. 10.69 L TOYOTA Super Long Life Coolant or equivalent DO NOT use alcohol type antifreeze or plain water alone. S
Engine Coolant 3.3L Eng w/Rear Heater,w/Towing Package 12.00 QTS. 11.35 L TOYOTA Super Long Life Coolant or equivalent DO NOT use alcohol type antifreeze or plain water alone. S
Engine Oil 3.3L Eng Drain and Refill,w/Filter 5.00 QTS. 4.73 L ILSAC GF-4 SAE 5W-30 S
Engine Oil 3.3L Eng Drain and Refill,w/o Filter 4.80 QTS. 4.54 L ILSAC GF-4 SAE 5W-30 S
Fuel Tank 3.3L Eng 17.20 GALS. 65.1 L S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON II or DEXRON III S
Transfer Case Fluid 1.00 QTS. 0.94 L API - GL-5 Hypoid Gear Oil, SAE 90 Above 0Deg.F (-18Deg C), SAE 80W or 80W-90 Below 0Deg. F (-18Deg C) S
Windshield Washer Fluid N/A N/A Plain water In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. Not radiator antifreeze. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.