2006 Toyota Highlander Limited, AWDFACTORY OEM SERVICE PROCEDURE

Recommended Tools

AXLE - RECOMMENDED TOOLS CHART

G04423658Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09011-12301 Socket Wrench 30 mm  
G04423659Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09042-00010 Torx Socket T30  
G04423660Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09905-00013 Snap Ring Pliers  

HINT:

Trox is a registered trademark of Textron Inc.

Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.