ECM (1ZZ-FE/2ZZ-GE) Replacement

1. Remove the screw from the glove compartment door stoppers.
2. Deform the upper part of the glove compartment door assy to release the stoppers.
3. Pull the glove compartment door assy upward to remove it.

Fig 1: Removing Screw From Glove Compartment Door Stoppers

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 clips using a clip remover, then open the cover.
   Fig 2: Removing 2 Clips Using A Clip Remover And Open Cover

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the 4 ECM connectors.
3. Remove the wire harness from the wire harness clamp.
   Fig 3: Disconnecting 4 ECM Connectors

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 screws.
5. Unfasten the claw and clip, then remove the ECM.

Fig 4: Removing ECM

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the ECM cover from the ECM.

Fig 5: Removing ECM Cover From ECM

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 4 screws, then remove the ECM bracket.

Fig 6: Removing ECM Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 screws, then remove the ECM bracket.

Fig 7: Removing ECM Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 screws, then remove the ECM bracket No. 2.

Fig 8: Removing ECM Bracket No. 2

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 screws, then remove the ECM bracket No. 3.

Fig 9: Removing ECM Bracket No. 3

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the ECM bracket No. 3 with the 2 screws.

   Torque: 3.2 N.m (33 kgf.cm, 28 in..lbf) 

Fig 10: Installing ECM Bracket No. 3 With 2 Screws

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the ECM bracket No. 2 with the 2 screws.

   Torque: 3.2 N.m (33 kgf.cm, 28 in..lbf) 

Fig 11: Installing ECM Bracket No. 2

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the ECM bracket with the 2 screws.

   Torque: 3.2 N.m (33 kgf.cm, 28 in..lbf) 

Fig 12: Installing ECM Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the ECM bracket with the 4 screws.

   Torque: 3.2 N.m (33 kgf.cm, 28 in..lbf) 

Fig 13: Installing ECM Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install a new ECM cover onto the ECM as shown in the illustration.

Fig 14: Installing New ECM Cover Onto ECM

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the ECM with the 2 screws.

   Torque: 3.0 N.m (31 kgf.cm, 27 in..lbf) 

   Fig 15: Installing ECM

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 4 ECM connectors.
3. Install the wire harness clamp.
   Fig 16: Connecting 4 ECM Connectors

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the cover with the 2 clips.

Fig 17: Installing Cover With 2 Clips

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf) 

HINT:

• 1ZZ-FE (See REGISTRATION )
• 2ZZ-GE (See REGISTRATION )