Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Toyota RAV4 SportFACTORY OEM SERVICE PROCEDURE
Service Data
Service Data Specification (SFI)
| Fuel pressure regulator | Fuel pressure | 304 to 343 kPa (3.1 to 3.5 kgf/cm2 , 44 to 50 psi) | |
| Engine stopped | 147 kPa (1.5 kgf/cm2 , 21 psi) or more | ||
| Fuel pump | Resistance | at 20°C (68°F) | 0.2 to 3.0 Ω |
| Injector | Resistance | at 20°C (68°F) | 11.6 to 12.4 Ω |
| Injection volume | 76 to 92 cm3 (4.6 to 5.6 cu in.) per 15 sec. | ||
| Difference between each cylinder | 16 cm3 (1.0 cu in.) or less | ||
| Fuel leakage | 1 drop or less per 12 min. | ||
| MAF meter | Resistance | at -20°C (-4°F) | 13.6 to 18.4 kΩ |
| at 20°C (68°F) | 2.21 to 2.69 kΩ | ||
| at 60°C (140°F) | 0.49 to 0.67 kΩ | ||
| Throttle body | Resistance | at 20°C (68°F) | 0.3 to 100 kΩ |
| Camshaft timing OCV | Resistance | at 20°C (68°F) | 6.9 to 7.9 Ω |
| VSV for EVAP | Resistance | at 20°C (68°F) | 30 to 34 Ω |
| VSV for CCV | Resistance | at 20°C (68°F) | 25 to 30 Ω |
| VSV for pressure switching valve | Resistance | at 20°C (68°F) | 30 to 36 Ω |
| ECT sensor | Resistance | at -20°C (-4°F) | 10 to 20 kΩ |
| at 0°C (32°F) | 4 to 7 kΩ | ||
| at 20°C (68°F) | 2 to 3 kΩ | ||
| at 40°C (104°F) | 0.9 to 1.3 kΩ | ||
| at 60°C (140°F) | 0.4 to 0.7 kΩ | ||
| at 80°C (176°F) | 0.2 to 0.4 kΩ | ||
| Vapor pressure sensor | Power source voltage | 4.5 to 5.5 V | |
| A/F sensor | Heater coil resistance | at 20°C (68°F) | 0.8 to 1.4 Ω |
| at 800°C (1,472°F) | 1.8 to 3.2 Ω | ||
| Heated oxygen sensor | Heater coil resistance | at 20°C (68°F) | 11 to 16Ω |
| at 800°C (1,472°F) | 23 to 32 Ω | ||
| Accelerator pedal position sensor | Resistance | at 20°C (68°F) | 2.25 to 4.75 kΩ |
| Fuel cut rpm | Fuel cutoff rpm | 1,050 to 1,150 rpm (M/T), 1,350 to 1,450 rpm (A/T) | |
| Fuel injector restart rpm | 850 to 950 rpm (M/T), 1,050 to 1,150 rpm (A/T) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.