2005 Toyota PriusFACTORY OEM SERVICE PROCEDURE

System Description

  1. SMART ENTRY SYSTEM DESCRIPTION 
    • In addition to the mechanical key function and the wireless door lock remote control function, this system provides the smart key with a bi-directional communication function. This function enables the smart key ECU to recognize the presence of the smart key within several detection areas. The system can lock or unlock the doors, or start the hybrid system without key operation as long as the smart key is in the user's possession.
    • This system consists of a smart key ECU, power source control ECU, transponder key ECU, multiplex network body ECU, smart key, 5 oscillators, 5 antennas, 2 touch sensors, 3 trigger switches and a door control receiver. The smart key ECU controls the system.
    • The smart entry system operates in conjunction with the push button start system, the immobilizer system and the wireless door lock remote control system.
  2. FUNCTION OF MAIN COMPONENTS 
    Fig 1: Main Components Function Chart (1 Of 2)
    G02617530Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.