2005 Toyota PriusFACTORY OEM SERVICE PROCEDURE

Inspection Procedure

  1. CHECK MULTIPLEX COMMUNICATION SYSTEM 
    1. Check that the multiplex communication system operates normally.

      OK: Multiplex communication system operates normally. 

    1. NG: Go to MULTIPLEX COMMUNICATION SYSTEM (See  HOW TO PROCEED WITH TROUBLESHOOTING  ) 
    2. OK: GO TO NEXT STEP 
  2. CHECK OPERATION OF COMBINATION METER 
    1. After replacing the combination meter with a new one, check that the smart indicator operates normally.

      OK: Smart indicator operates normally. 

    1. NG: REPLACE SMART KEY ECU ASSY 
    2. OK: GO TO NEXT STEP 

      END 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.