Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE
Service Data
SERVICE SPECIFICATIONS TABLE - STARTING
| Starter | Rated voltage and output power | 12 V 2.0 kW | ||
| No-load characteristics | Current | 100 A or less at 11.5 V | ||
| rpm | 2, 500 rpm or less | |||
| Brush length | STD | 15.0 mm (0.591 in.) | ||
| Minimum | 9.0 mm (0.354 in.) | |||
| Spring installed load | STD | 21.5 - 27.5 N (2.2 - 2.8 kgf, 4.8 - 6.2 lbf) | ||
| Minimum | 12.7 N (1.3 kgf, 2.9 lbf) | |||
| Commutator | ||||
| Diameter | STD | 35.0 mm (1.378 in.) | ||
| Minimum | 34.0 mm (1.339 in.) | |||
| Undercut depth | STD | 0.7 mm (0.028 in.) | ||
| Minimum | 0.2 mm (0.008 in.) | |||
| Circle runout | Maximum | 0.05 mm (0.0020 in.) | ||
| Field frame | ||||
| Shunt coil resistance | at 20°C (68°F) | 1.5 - 1.9 Ω | ||
| Magnetic switch | ||||
| Contact plate for wear | Maximum | 0.9 mm (0.035 in.) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.