2004 Toyota Matrix Base, FWD, StandardFACTORY OEM SERVICE PROCEDURE

Service Data: 1ZZ-FE

IGNITION SYSTEM (1ZZ-FE) SERVICE SPECIFICATIONS

Spark plug  
Recommended spark plug DENSO made SK16R11
NGK made IFR5A11
Electrode gap Standard 1.1 mm (0.043 in.)
Crank position sensor No. 1  
Resistance at cold 835 - 1,400Ω
at hot 1,060 - 1,645Ω
Crank position sensor  
Resistance at cold 1,630 - 2,740Ω
at hot 2,065 - 3,225Ω
Ignition relay  
Specified condition Between terminals 1 and 2 Continuity
Between terminals 3 and 5 No continuity
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.