Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Toyota Matrix Base, 4WDFACTORY OEM SERVICE PROCEDURE
Torque Specification: 3MZ-FE
WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION (3MZ-FE)
| Part Tightened | N.m | kgf.Cm | ft.lbf |
|---|---|---|---|
| Fuel delivery pipe sub-assy x Intake manifold | 10 | 102 | 7 |
| Fuel delivery pipe No. 2 x Intake manifold | 10 | 102 | 7 |
| Fuel pipe No. 2 union bolt x Fuel delivery pipe No. 2 | 33 | 331 | 24 |
| Fuel pressure pulsation damper assy x Fuel delivery pipe sub-assy | 33 | 331 | 24 |
| Fuel pipe sub-assy No. 1 x Intake manifold | 20 | 199 | 14 |
| Surge tank stay No. 2 x Intake air surge tank | 20 | 199 | 14 |
| Surge tank stay No. 2 x Cylinder head | 20 | 199 | 14 |
| Surge tank stay No. 1 x Intake air surge tank | 20 | 199 | 14 |
| Surge tank stay No. 1 x Cylinder head | 20 | 199 | 14 |
| Engine hunger No. 1 x Intake air surge tank | 20 | 199 | 14 |
| Engine hunger No. 1 x Cylinder head | 20 | 199 | 14 |
| Pressure feed tube assy x Engine hunger No. 1 | 7.8 | 80 | 69 in.lbf |
| Intake air surge tank x Intake manifold | 28 | 286 | 21 |
| Emission control valve set x Emission control valve bracket | 8.0 | 80 | 71 in.lbf |
| Fuel tank bent tube set plate x Fuel tank assy | 5.9 | 60 | 52 in.lbf |
| Fuel main tube support x Fuel tank assy | 5.4 | 55 | 48 in.lbf |
| Fuel tank band sub-assy No. 1 RH x Body | 39 | 400 | 29 |
| Fuel tank band sub-assy No. 1 LH x Body | 39 | 400 | 29 |
| Fuel tank protector lower center x Fuel tank assy | 5.4 | 55 | 48 in.lbf |
| Packing brake cable assy No. 2 x Body | 5.4 | 55 | 48 in.lbf |
| Packing brake cable assy No. 3 x Body | 5.4 | 55 | 48 in.lbf |
| Exhaust pipe assy center x Exhaust pipe assy front | 56 | 571 | 41 |
| Exhaust pipe assy center x Exhaust pipe assy tail | 56 | 571 | 41 |
| Floor panel brace rear x Body | 20 | 199 | 14 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
