Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Section 580 (Power Door Lock Control System): Inspection
- INSPECT DRIVER DOOR KEY LOCK AND UNLOCK SWITCH CONTINUITYÂ
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DRIVER DOOR KEY LOCK AND UNLOCK SWITCH SPECIFICATIONSSwitch Position Tester Connection Specified Condition LOCK 3 - 5 Continuity OFF - No Continuity UNLOCK 3-6 Continuity If continuity is not as specified, replace the door lock motor.
- INSPECT PASSENGER'S DOOR KEY LOCK AND UNLOCK SWITCH CONTINUITYÂ
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PASSENGER SIDE DOOR KEY LOCK AND UNLOCK SWITCH SPECIFICATIONSSwitch Position Tester Connection Specified Condition LOCK 2 - 4 Continuity OFF - No Continuity UNLOCK 1-4 Continuity If continuity is not as specified, replace the door lock motor.
- INSPECT DRIVER'S DOOR UNLOCK DETECTION SWITCH CONTINUITYÂ
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DRIVER SIDE DOOR UNLOCK DETECTION SWITCH SPECIFICATIONSSwitch Position Tester Connection Specified Condition OFF (Door Lock Set To LOCK) - No Continuity ON (Door Lock Set To UNLOCK) 3-4 Continuity If continuity is not as specified, replace the door lock motor.
- INSPECT PASSENGER'S DOOR UNLOCK DETECTION SWITCH CONTINUITYÂ
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PASSENGER SIDE DOOR UNLOCK DETECTION SWITCH SPECIFICATIONSSwitch Position Tester Connection Specified Condition OFF (Door Lock Set To LOCK) - No Continuity ON (Door Lock Set To UNLOCK) 3-4 Continuity If continuity is not as specified, replace the door lock motor.
- INSPECT REAR DOOR UNLOCK DETECTION SWITCH CONTINUITYÂ
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REAR DOOR UNLOCK DETECTION SWITCH CONTINUITY SPECIFICATIONSSwitch Position Tester Connection Specified Condition OFF (Door Lock Set To LOCK) - No Continuity ON (Door Lock Set To UNLOCK) 3-4 (Left Side) 1 - 2 (Right Side) Continuity If continuity is not as specified, replace the door lock motor.
- INSPECT DRIVER'S DOOR LOCK MOTOR OPERATIONÂ
- Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to UNLOCK position.
- Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.
- INSPECT PASSENGER'S DOOR LOCK MOTOR OPERATIONÂ
- Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 6, and check that the door lock cable moves to UNLOCK position.
- Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.
- INSPECT REAR LEFT SIDE DOOR LOCK MOTOR OPERATIONÂ
- Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to UNLOCK position.
- Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.
- INSPECT REAR RIGHT SIDE DOOR LOCK MOTOR OPERATIONÂ
- Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 4, and check that the door lock cable moves to UNLOCK position.
- Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.
- INSPECT BACK DOOR LOCK MOTOR OPERATIONÂ
- Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 4, and check that the door lock cable moves to UNLOCK position.
- Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.
- INSPECT BACK DOOR UNLOCK DETECTION SWITCH CONTINUITYÂ
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
BACK DOOR UNLOCK DETECTION SWITCH SPECIFICATIONSSwitch Position Tester Connection Specified Condition OFF (Door Lock Set To LOCK) - No Continuity ON (Door Lock Set To UNLOCK) 1-2 Continuity If continuity is not as specified, replace the back door lock motor.
- INSPECT BACK DOOR KEY LOCK AND UNLOCK CONTROL SWITCH CONTINUITYÂ
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
BACK DOOR KEY LOCK AND UNLOCK CONTROL SWITCH CONTINUITY SPECIFICATIONSSwitch Position Tester Connection Specified Condition LOCK 1 - 3 Continuity OFF - No Continuity UNLOCK 2 - 3 Continuity If continuity is not as specified, replace the switch.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
