Quick Lookups: Fluids

2002 Toyota 4Runner BaseSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 7.00 OZS. 0.2 L PAG 46 S
Air Cond Refrigerant 1.40 LBS. 0.63 KG R-134a S
Automatic Transmission Fluid RWD Drain and Refill 1.70 QTS. 1.6 L Automatic Transmission Fluid DEXRON II or DEXRON III S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Rear,w/Differential Lock 2.90 QTS. 2.74 L API - GL-5, SAE 90W (Above 0Deg.F), SAE 80W or 80W-90 (Below 0Deg.F) S
Differential Gear Oil Rear,w/o Differential Lock 2.60 QTS. 2.46 L API - GL-5, SAE 90W (Above 0Deg.F), SAE 80W or 80W-90 (Below 0Deg.F) S
Differential Gear Oil RWD 2.90 QTS. 2.74 L API - GL-5, SAE 75W-90 S
Engine Coolant w/o Rear Heater 8.50 QTS. 8.04 L TOYOTA Long Life Coolant or equivalent DO NOT use alcohol type antifreeze or plain water alone. S
Engine Coolant w/Rear Heater 9.50 QTS. 8.99 L TOYOTA Long Life Coolant or equivalent DO NOT use alcohol type antifreeze or plain water alone. S
Engine Oil Drain and Refill,w/Filter 5.50 QTS. 5.2 L SAE 5W-30 S
Engine Oil Drain and Refill,w/o Filter 5.20 QTS. 4.92 L SAE 5W-30 S
Fuel Tank 18.50 GALS. 70.03 L S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON II or DEXRON III S
Transfer Case Fluid 1.30 QTS. 1.23 L API - GL-4 or GL-5, SAE 75W-90 S
Windshield Washer Fluid N/A N/A Plain water In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. Not radiator antifreeze. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.