Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Toyota RAV4 Base, AWD, AutomaticFACTORY OEM SERVICE PROCEDURE
Diagnostic Trouble Code Definitions
DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC (1) | Description | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| P0105 (2) | Manifold Absolute Pressure (MAP)/Barometric Pressure Sensor Circuit | ||||||||||
| P0106 | Manifold Absolute Pressure (MAP)/Barometric Pressure Sensor Circuit Range/Performance | ||||||||||
| P0110 (2) | Intake Air Temperature (IAT) Sensor Circuit | ||||||||||
| P0115 (2) | Engine Coolant Temperature (ECT) Sensor Circuit | ||||||||||
| P0116 | Engine Coolant Temperature (ECT) Sensor Circuit Range/Performance | ||||||||||
| P0120 (2) | Throttle Position (TP) Sensor Circuit | ||||||||||
| P0121 | Throttle Position (TP) Sensor Circuit Range/Performance | ||||||||||
| P0125 | Insufficient Coolant Temperature For Closed Loop Fuel Control (Except Calif. Emissions) | ||||||||||
| P0125 | Insufficient Coolant Temperature For Closed Loop Fuel Control (Calif. Emissions) | ||||||||||
| P0130 | Heated Oxygen Sensor No. 1 Circuit (Except Calif. Emissions) | ||||||||||
| P0133 | Heated Oxygen Sensor No. 1 Circuit Slow Response (Except Calif. Emissions) | ||||||||||
| P0135 (2) | Heated Oxygen Sensor No. 1 Heater Circuit (Except Calif. Emissions) | ||||||||||
| P0136 | Heated Oxygen Sensor No. 2 Circuit | ||||||||||
| P0141 (2) | Heated Oxygen Sensor No. 2 Heater Circuit | ||||||||||
| P0171 | System Too Lean (Except Calif. Emissions) | ||||||||||
| P0171 | System Too Lean (Calif. Emissions) | ||||||||||
| P0172 | System Too Rich (Except Calif. Emissions) | ||||||||||
| P0172 | System Too Rich (Calif. Emissions) | ||||||||||
| P0300 | Random Misfire Detected | ||||||||||
| P0301 | Cylinder No. 1 Misfire Detected | ||||||||||
| P0302 | Cylinder No. 2 Misfire Detected | ||||||||||
| P0303 | Cylinder No. 3 Misfire Detected | ||||||||||
| P0304 | Cylinder No. 4 Misfire Detected | ||||||||||
| P0325 (2) | Knock Sensor Circuit | ||||||||||
| P0335 | Crankshaft Position (CKP) Sensor Circuit | ||||||||||
| P0340 | Camshaft Position (CMP) Sensor Circuit | ||||||||||
| P0401 | Insufficient Exhaust Gas Recirculation (EGR) Flow Detected | ||||||||||
| P0402 | Excessive Exhaust Gas Recirculation (EGR) Flow Detected | ||||||||||
| P0420 | Catalyst System Efficiency Below Threshold (Except Calif. Emissions) | ||||||||||
| P0420 | Catalyst System Efficiency Below Threshold (Calif. Emissions) | ||||||||||
| P0440 | Evaporative Emission Control System | ||||||||||
| P0441 | Incorrect EVAP Purge Flow | ||||||||||
| P0446 | EVAP Vent Control Circuit | ||||||||||
| P0450 | EVAP Pressure Sensor Circuit | ||||||||||
| P0451 | EVAP Pressure Sensor Range/Performance | ||||||||||
| P0500 | Vehicle Speed Sensor Circuit | ||||||||||
| P0505 | Idle Air Control (IAC) System Circuit | ||||||||||
| P0750 (3) | Shift Solenoid Valve No. 1 Malfunction | ||||||||||
| P0753 (3) | Shift Solenoid Valve No. 1 Electrical Malfunction | ||||||||||
| P0755 (3) | Shift Solenoid Valve No. 2 Malfunction | ||||||||||
| P0758 (3) | Shift Solenoid Valve No. 2 Electrical Malfunction | ||||||||||
| P0770 (3) | Lock-Up Solenoid Malfunction | ||||||||||
| P0773 (3) | Lock-Up Solenoid Circuit Electrical Malfunction | ||||||||||
| P1130 | Air/Fuel Sensor Circuit Range/Performance Malfunction (Calif. Emissions) | ||||||||||
| P1133 | Air/Fuel Sensor Circuit Response Malfunction (Calif. Emissions) | ||||||||||
| P1135 | Air/Fuel Sensor Heater Circuit Malfunction (Calif. Emissions) | ||||||||||
| P1300 (2) | Ignitor No. 1 Circuit | ||||||||||
| P1310 (2) | Ignitor No. 2 Circuit | ||||||||||
| P1335 (4) | Crankshaft Position (CKP) Sensor Circuit | ||||||||||
| P1520 | Stoplight Switch Signal Circuit (A/T) | ||||||||||
| P1600 | ECM BATT Circuit | ||||||||||
| P1700 (3)(5) | Vehicle Speed Sensor No. 2 Malfunction | ||||||||||
| P1715 (3)(5) | Rear Wheel Speed Sensor Malfunction | ||||||||||
| P1760 (3)(5) | Shift Solenoid Valve SLT Malfunction | ||||||||||
| P1775 (3)(5) | Differential Lock Solenoid No. 1 Malfunction | ||||||||||
| P1780 | Park/Neutral Position (PNP) Switch Circuit (A/T) | ||||||||||
|
|||||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.