2000 Toyota MR2FACTORY OEM SERVICE PROCEDURE

Test No. 8: Door Lock Control Switch: Testing

  1. Check operation of door lock control switch. See POWER DOOR LOCKS - CARS article. If door lock control switch operates properly, go to next step. If door lock control switch is defective, replace door lock control switch.
  2. Check for faulty connectors and wiring between door lock control switch and body Electronic Control Unit (ECU). See WIRING DIAGRAMS . Repair connectors or wiring as necessary. If connectors and wiring are okay, go to next step.
  3. Check for faulty connectors and wiring between door lock control switch and ground. See WIRING DIAGRAMS .
  4. Repair connectors, wiring or ground as necessary. If connectors, wiring and ground are okay, go to next test listed. See appropriate TROUBLE SHOOTING SYMPTOMS table under TROUBLE SHOOTING.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.