Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Toyota Tercel AutomaticFACTORY OEM SERVICE PROCEDURE
Diagnostic Trouble Code Definitions
DIAGNOSTIC TROUBLE CODE (DTC) DEFINITIONS
| DTC | Description | ||||
|---|---|---|---|---|---|
| P0105 | Manifold Absolute Pressure (MAP)/Barometric Pressure Sensor Circuit | ||||
| P0106 | Manifold Absolute Pressure (MAP)/Barometric Pressure Sensor Circuit | ||||
| P0110 | Intake Air Temperature (IAT) Sensor Circuit | ||||
| P0115 | Engine Coolant Temperature (ECT) Sensor Circuit | ||||
| P0116 (1) | Engine Coolant Temperature (ECT) Sensor Circuit Range/Performance Problem | ||||
| P0120 | Throttle Position (TP) Sensor Circuit Malfunction | ||||
| P0121 (1) | Throttle Position (TP) Sensor Circuit Range/Performance Fault | ||||
| P0125 | Insufficient Coolant Temperature For Closed Loop Fuel Control | ||||
| P0130 (1) | (2) Oxygen Sensor Circuit (Sensor No. 1) | ||||
| P0133 (1) | (2) Oxygen Sensor Circuit (Sensor No. 1) Slow Response | ||||
| P0136 (1) | (2) Heated Oxygen Sensor Circuit (Sensor No. 2) | ||||
| P0141 (1) | Heated Oxygen Sensor Circuit (Sensor No. 2) | ||||
| P0171 (1) | System Too Lean (Fuel Trim) | ||||
| P0172 (1) | System Too Rich (Fuel Trim) | ||||
| P0300 | Random/Multiple Misfire Detected | ||||
| P0301 (1) | Cylinder No. 1 Misfire Detected | ||||
| P0302 (1) | Cylinder No. 2 Misfire Detected | ||||
| P0303 (1) | Cylinder No. 3 Misfire Detected | ||||
| P0304 (1) | Cylinder No. 4 Misfire Detected | ||||
| P0325 | Knock Sensor Circuit | ||||
| P0335 (1) | Crankshaft Position (CKP) Sensor Circuit | ||||
| P0340 (1) | Camshaft Position (CMP) Sensor Circuit | ||||
| P0420 (1) | Catalyst System Efficiency Below Threshold | ||||
| P0440 (1) | Evaporative Emission Control System Malfunction | ||||
| P0441 (1) | Incorrect EVAP Purge Flow | ||||
| P0446 (1) | Vent Control Malfunction | ||||
| P0450 | EVAP Pressure Sensor Fault | ||||
| P0451 | EVAP Pressure Sensor Range/Performance | ||||
| P0500 (1) | Vehicle Speed Sensor Fault | ||||
| P0505 (1) | Idle Air Control (IAC) System Malfunction | ||||
| P1300 | Ignitor Circuit Malfunction | ||||
| P1335 | Crankshaft Position (CKP) Sensor Circuit | ||||
| P1600 | ECM BATT Malfunction | ||||
| P1780 (1) | Park/Neutral Position (PNP) Switch | ||||
|
|||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.